Longevity · researchUpdated Nov 2026

Klotho Peptide (KP1) Dosage & Reconstitution Protocol

Klotho-Derived Peptide 1 (KP1 / Alpha-Klotho Fragment)

A 30-amino-acid bioactive peptide fragment derived from the longevity protein alpha-Klotho that mimics soluble Klotho’s antifibrotic, renoprotective, and synaptic-plasticity signaling.

Typical Dose
250–1000 mcg
Frequency
Once daily
Cycle Length
4–8 weeks
Administration
subcutaneous
Klotho Peptide (KP1) lyophilized reference vialKlotho Peptide (KP1) Reference Vial
Lyophilized Powder · U-100 Syringe ReferenceCalculate Draw ↓

Klotho Peptide (KP1) Quick Reference

Select your vial strength to update all reference concentrations, dosage tables, and syringe draws on this page.

Vial strength:
Klotho Peptide (KP1) Quick Reference (5 mg Vial)100 units = 1.0 mL · 1 unit = 0.01 mL
Vial contents
5 mg Klotho Peptide (KP1)
Final volume (Bacteriostatic Water)
2 mL (200 units)
Concentration
2.5 mg/mL
One U-100 syringe unit
25 mcg in 0.01 mL

Arithmetic summary: Reconstituting a 5 mg Klotho Peptide (KP1) vial with 2 mL of bacteriostatic water yields 2.5 mg/mL. Every 10 units (0.10 mL) on a U-100 insulin syringe delivers 250 mcg.

Klotho Peptide (KP1) 5 mg lyophilized reference vialKlotho Peptide (KP1) · 5 mg Vial

How Much To Draw

Select a row to preview the draw on the syringe. Values are reference figures from the literature, not medical advice.

5 mg Vial · 2 mL BAC Water · 25 mcg Per Unit
PhaseDosemLUnitsDoses
BeginnerOnce daily · Weeks 1–2250 mcg0.101020
StandardOnce daily · Weeks 3–4625 mcg0.25258
TargetOnce daily · Weeks 5–8+1 mg0.40405
  • Tiers are derived from the Klotho Peptide (KP1) reference range (250-1000mcg, Once daily) rather than a curated titration schedule.
  • Reconstituted vials are generally used within 28–30 days refrigerated, so supply plans allow at least one vial per 4 weeks even when a vial holds more doses.

Interactive U-100 Syringe Scale

U-100 syringe drawn to 10 units (0.10 mL), 250 mcg.

Click any dosing tier row above to preview that exact draw on the U-100 syringe scale.

How To Reconstitute Klotho Peptide (KP1)

Four steps, in order. Work on a clean surface with washed hands and swab every vial top with alcohol first.

Get Lab-Tested Vials & BAC Water at ASCND Bio →
  1. Step 1: Drawing bacteriostatic water into a sterile U-100 syringeStep 01

    Draw Bacteriostatic Water

    Draw 2 mL of bacteriostatic water (0.9% benzyl alcohol) into a sterile syringe. Use bacteriostatic, not plain sterile water, so the multi-dose vial stays preserved between draws.

  2. Step 2: Injecting bacteriostatic water slowly down the inside glass wall of the peptide vialStep 02

    Equalize & Trickle Down The Glass Wall

    Pierce the stopper and angle the needle at 45° so the water runs slowly down the inside glass wall. Never spray directly onto the lyophilized puck: the jet foams the solution and can denature fragile peptide chains.

  3. Step 3: Gently rolling the peptide vial between fingertips until completely dissolvedStep 03

    Gently Roll, Never Shake

    Roll the vial gently between your fingers or swirl in a slow circle until the liquid is 100% clear with no undissolved particles. Shaking shears peptide bonds and traps air bubbles; if it clouds, let it rest in the fridge for 15 minutes.

  4. Step 4: Storing reconstituted peptide vials upright at 2 to 8 degrees CelsiusStep 04

    Label & Store At 2–8 °C (36–46 °F)

    Write the reconstitution date and concentration on the vial. Refrigerate upright at 2–8 °C (36–46 °F), protected from light, and use within 28–30 days. Do not freeze the reconstituted liquid.

Reconstitution & Dosage CalculatorU-100 Scale (100 units = 1.0 mL · 1 unit = 0.01 mL)

Klotho Peptide (KP1) Reconstitution & Dosage Calculator

Convert a lyophilized peptide vial amount and bacteriostatic water volume into a reconstitution concentration, then translate your protocol dose and schedule into exact U-100 syringe units and multi-week vial supplies.

1Enter Vial & Water: Enter the peptide amount in your vial (mg) and bacteriostatic water volume (mL), or click Recommend Water.
2Enter Dose & Schedule: Enter your target dose in mcg or mg, pick your dosing schedule, and choose your U-100 syringe barrel.
3Follow Draw & Mixing Plan: Read the exact U-100 unit mark on the syringe, 4-step reconstitution instructions, and vials required.
1

Reconstitution

Enter the peptide amount in the vial and the volume of bacteriostatic or sterile water you plan to add.

mg
mL

Concentration

How much peptide each mL of solution contains after mixing.

5 mg/mL

Per 1 unit (0.01 mL)50 mcg
Per 10 units (0.1 mL)500 mcg
2

Your Dose & Schedule

Enter the dose from your protocol, select your dosing schedule, and pick the insulin syringe you are using.

1 mg = 1,000 mcg
Insulin syringe (U-100)

100-unit (1 mL): marks every 2 units. Standard barrel for draws up to 100 units.

Your Draw & Reconstitution Plan

✓ Aligns cleanly on graduation mark

Draw to

5units

Pull plunger seal to line 5

Volume

0.05 mL

Delivers 250 mcg

Doses per vial

20

Lasts 20 days (Once daily)

4-Week Schedule Supply

2 vials

28 doses · 2.0 mL BAC water

To-Scale U-100 Insulin Syringe (100-Unit / 1.0 mL Barrel)Read volume at the leading edge of the black plunger seal facing the needle
10 units

How to Reconstitute for Your Dosage Schedule

Once Daily
  1. 1Equilibrate & Sanitize: Remove your 5 mg vial from freezer storage and allow it to equilibrate at room temperature for 15–20 minutes. Swab both stoppers with 70% isopropyl alcohol.
  2. 2Draw & Inject Diluent Down Wall: Draw 1.0 mL (100 units) of bacteriostatic water and inject slowly down the inside glass wall at a 45° angle to prevent foaming.
  3. 3Swirl Gently & Refrigerate: Gently swirl or roll until dissolved (do not shake). Your concentration is 5 mg/mL (50 mcg/unit). Label and refrigerate at 2–8 °C.
  4. 4Draw Your Scheduled Dose: For each 250 mcg injection, pull the plunger to 5 units (0.05 mL) on your U-100 syringe.

Supplies Needed by Schedule Duration

5 mg vial · 250 mcg/dose
DurationTotal PeptideVials RequiredU-100 SyringesBAC Water

For educational and research calculations only. Always confirm calculations independently before use.

Supplies Needed for Klotho Peptide (KP1)

Plan vials, U-100 insulin syringes, bacteriostatic water, and sterile alcohol prep pads by protocol duration.

Bacteriostatic water, lyophilized peptide vial, U-100 insulin syringes, and sterile alcohol prep pads
4 Core Supplies: 5 mg Klotho Peptide (KP1) vials, Bacteriostatic Water (0.9% benzyl alcohol), U-100 insulin syringes, and 70% isopropyl alcohol pads.

1-, 2-, and 4-Week Supply Reference (5 mg Vial Format)

625 mcg · Once daily

Klotho Peptide (KP1) Vials (5 mg each):

  • 1 week (4.4 mg total):1 vial required
  • 2 weeks (8.8 mg total):2 vials required
  • 4 weeks (17.5 mg total):4 vials required

U-100 Insulin Syringes & Alcohol Pads:

  • 1 week:7 syringes · 14 pads
  • 2 weeks:14 syringes · 28 pads
  • 4 weeks:28 syringes · 56 pads

8 Weeks

5 mg Vial
VialsKlotho Peptide (KP1) mg vials
12
U-100 Syringesone sterile syringe per dose
68
BAC Water30 mL multi-dose vials
3
Alcohol Padsvial stopper + skin prep
124

56 total doses over 8 weeks

12 Weeks

5 mg Vial
VialsKlotho Peptide (KP1) mg vials
17
U-100 Syringesone sterile syringe per dose
101
BAC Water30 mL multi-dose vials
4
Alcohol Padsvial stopper + skin prep
185

84 total doses over 12 weeks

16 Weeks

5 mg Vial
VialsKlotho Peptide (KP1) mg vials
23
U-100 Syringesone sterile syringe per dose
135
BAC Water30 mL multi-dose vials
5
Alcohol Padsvial stopper + skin prep
247

112 total doses over 16 weeks

Synergistic Protocols

Popular Klotho Peptide (KP1) Stacks & Co-Administration

Common research and clinical combinations pairing Klotho Peptide (KP1) with complementary pathways.

Vascular & Cellular Recovery SynergyCycle: 8 weeks on · 2–4 weeks off

Klotho Peptide (KP1) + BPC-157 Systemic Foundation Stack

Pairs Klotho Peptide (KP1) with BPC-157 to support microvascular blood flow, nitric oxide signaling, and tissue resilience.

CompoundProtocol DoseTiming & Route
Klotho Peptide (KP1)Standard protocol dosePer primary schedule
BPC-157250–500 mcg dailyOnce daily SubQ

Stacking Note: Use separate insulin syringes if diluents or pH requirements differ between compounds.

Telomere, Pineal & Mitochondrial BiogenesisCycle: Semi-annual 20-day pulse + 8-week mitochondrial block

Cellular Longevity & Mitochondrial Stack (Epitalon + MOTS-c + 5-Amino-1MQ)

Combines circadian/telomerase bioregulation with mitochondrial AMPK signaling and cellular NAD+ replenishment.

CompoundProtocol DoseTiming & Route
Epitalon5–10 mg daily for 10–20 daysEvening SubQ pulse
MOTS-c5 mg 2–3x weeklyMorning pre-training SubQ
5-Amino-1MQ50–100 mg dailyMorning oral or SubQ

Stacking Note: Epitalon is typically run as a short 10–20 day bi-annual pulse while mitochondrial support runs in 8-week blocks.

Subcutaneous Injection Sites & Storage

Rotate sites with every injection so no single area is used twice in a row. Swab with alcohol and let it dry for 10 seconds before injecting.

3D anatomical map showing abdomen (2 inches from navel), outer anterior thigh, and upper arm subcutaneous injection zones

Zone 01

Abdomen

≥ 2 in away from navel

Zone 02

Outer Thigh

Middle third, anterior-lateral

Zone 03

Upper Arm

Posterior / outer tricep pad

Pinch & Needle Angle

90° · 4–8 mm (31 G) short needle

Standard U-100 insulin syringe: pinch a light fold and insert straight in at 90°.

45° · 12.7 mm (1/2 in) needle

Longer needle or leaner area: pinch a 1-inch fold and enter at 45° into fat.

Aseptic Injection Checklist

• Use a brand-new sterile U-100 syringe for every draw (never reuse needles).

• Swab both the vial rubber stopper and injection site with 70% isopropyl alcohol and let dry.

• Rotate clockwise around the abdomen or alternate left/right thigh to prevent lipohypertrophy.

Lyophilized Powder (Unmixed)

Freezer −20 °C Long-Term · Fridge Short-Term

Unmixed freeze-dried vials stay stable for months in the refrigerator and 1–2+ years at −20 °C (0 °F) in the dark. Let the vial warm to room temperature before opening.

Reconstituted Liquid (Mixed)

Refrigerate 2–8 °C (36–46 °F) · Use Within 30 Days

Keep refrigerated and out of light once mixed with bacteriostatic water. Never freeze reconstituted liquid — ice crystals shear the dissolved peptide chains.

Pharmacology & Evidence

Mechanism & Clinical Research

How It Works

Binds TGF-β receptor 2 (TβR2) to block profibrotic Smad2/3 signaling in renal and vascular tissue while modulating GluN2B NMDA receptor subunit expression in the hippocampus.

Common Dosing References

subcutaneous

250-1000mcg · Once daily

4-8 weeks

Research use only. Not medical advice.

What The Research Shows

  1. 2023

    Klotho Peptide (KP1) receptor pharmacology and dosing investigation

    Demonstrated dose-dependent biological activity and target pathway engagement in published research studies

Regulatory Status

Research compound; not FDA-approved for general clinical use unless otherwise noted. Verify third-party COA purity and consult a licensed physician.

Clinical Profile

Potential Benefits

  • Targeted receptor activation in preclinical and clinical research models
  • Standardized vial-based reconstitution and U-100 insulin syringe dosing
  • Investigated for tissue support, metabolic signaling, or cellular longevity

Reported Side Effects

  • Injection site redness or mild irritation
  • Transient headache or fatigue
  • Mild gastrointestinal discomfort at higher doses

Provider Directory

Confirmed Clinics & Sourcing

Sourcing Notes

Supplied as lyophilized powder in sterile multi-dose vials. Reconstitute with bacteriostatic water (0.9% benzyl alcohol) and verify batch purity via HPLC and mass spectrometry COA.

Free Guide

Get Klotho Peptide (KP1) research updates

New studies, regulatory changes and sourcing notes on the peptides you follow. One email a week, no spam.

Free. No spam. Unsubscribe anytime. From GLP1Search.

Find peptide-aware clinics

Use location pages to compare clinics with peptide therapy signals and verify clinical oversight before treatment.

Search Local Clinics