Longevity · researchUpdated Nov 2026

Glutathione Dosage & Reconstitution Protocol

Reduced L-Glutathione (GSH: γ-L-Glutamyl-L-Cysteinyl-Glycine)

The body’s primary endogenous intracellular tripeptide antioxidant (glutamate-cysteine-glycine), reconstituted from 600 mg lyophilized vials for subcutaneous or intramuscular support of hepatic phase II detoxification and redox balance.

Typical Dose
100–200 mg
Frequency
2-3x weekly or daily
Cycle Length
4–12 weeks
Administration
subcutaneous
Glutathione lyophilized reference vialGlutathione Reference Vial
Lyophilized Powder · U-100 Syringe ReferenceCalculate Draw ↓

Glutathione Quick Reference

Select your vial strength to update all reference concentrations, dosage tables, and syringe draws on this page.

Vial strength:
Glutathione Quick Reference (600 mg Vial)100 units = 1.0 mL · 1 unit = 0.01 mL
Vial contents
600 mg Glutathione
Final volume (Bacteriostatic Water)
1.5 mL (150 units)
Concentration
400 mg/mL
One U-100 syringe unit
4000 mcg in 0.01 mL

Arithmetic summary: Reconstituting a 600 mg Glutathione vial with 1.5 mL of bacteriostatic water yields 400 mg/mL. Every 10 units (0.10 mL) on a U-100 insulin syringe delivers 40000 mcg.

Glutathione 600 mg lyophilized reference vialGlutathione · 600 mg Vial

How Much To Draw

Select a row to preview the draw on the syringe. Values are reference figures from the literature, not medical advice.

600 mg Vial · 1.5 mL BAC Water · 4000 mcg Per Unit
PhaseDosemLUnitsDoses
Beginner3× weekly · Weeks 1–2100 mg0.25256
Standard3× weekly · Weeks 3–4150 mg0.38384
Target3× weekly · Weeks 5–8+200 mg0.50503
  • Reconstituted vials are generally used within 28–30 days refrigerated, so supply plans allow at least one vial per 4 weeks even when a vial holds more doses.

Interactive U-100 Syringe Scale

U-100 syringe drawn to 25 units (0.25 mL), 100 mg.

Click any dosing tier row above to preview that exact draw on the U-100 syringe scale.

How To Reconstitute Glutathione

Four steps, in order. Work on a clean surface with washed hands and swab every vial top with alcohol first.

Get Lab-Tested Vials & BAC Water at ASCND Bio →
  1. Step 1: Drawing bacteriostatic water into a sterile U-100 syringeStep 01

    Draw Bacteriostatic Water

    Draw 1.5 mL of bacteriostatic water (0.9% benzyl alcohol) into a sterile syringe. Use bacteriostatic, not plain sterile water, so the multi-dose vial stays preserved between draws.

  2. Step 2: Injecting bacteriostatic water slowly down the inside glass wall of the peptide vialStep 02

    Equalize & Trickle Down The Glass Wall

    Pierce the stopper and angle the needle at 45° so the water runs slowly down the inside glass wall. Never spray directly onto the lyophilized puck: the jet foams the solution and can denature fragile peptide chains.

  3. Step 3: Gently rolling the peptide vial between fingertips until completely dissolvedStep 03

    Gently Roll, Never Shake

    Roll the vial gently between your fingers or swirl in a slow circle until the liquid is 100% clear with no undissolved particles. Shaking shears peptide bonds and traps air bubbles; if it clouds, let it rest in the fridge for 15 minutes.

  4. Step 4: Storing reconstituted peptide vials upright at 2 to 8 degrees CelsiusStep 04

    Label & Store At 2–8 °C (36–46 °F)

    Write the reconstitution date and concentration on the vial. Refrigerate upright at 2–8 °C (36–46 °F), protected from light, and use within 28–30 days. Do not freeze the reconstituted liquid.

Reconstitution & Dosage CalculatorU-100 Scale (100 units = 1.0 mL · 1 unit = 0.01 mL)

Glutathione Reconstitution & Dosage Calculator

Convert a lyophilized peptide vial amount and bacteriostatic water volume into a reconstitution concentration, then translate your protocol dose and schedule into exact U-100 syringe units and multi-week vial supplies.

1Enter Vial & Water: Enter the peptide amount in your vial (mg) and bacteriostatic water volume (mL), or click Recommend Water.
2Enter Dose & Schedule: Enter your target dose in mcg or mg, pick your dosing schedule, and choose your U-100 syringe barrel.
3Follow Draw & Mixing Plan: Read the exact U-100 unit mark on the syringe, 4-step reconstitution instructions, and vials required.
1

Reconstitution

Enter the peptide amount in the vial and the volume of bacteriostatic or sterile water you plan to add.

mg
mL

Concentration

How much peptide each mL of solution contains after mixing.

5 mg/mL

Per 1 unit (0.01 mL)50 mcg
Per 10 units (0.1 mL)500 mcg
2

Your Dose & Schedule

Enter the dose from your protocol, select your dosing schedule, and pick the insulin syringe you are using.

1 mg = 1,000 mcg
Insulin syringe (U-100)

100-unit (1 mL): marks every 2 units. Standard barrel for draws up to 100 units.

Your Draw & Reconstitution Plan

✓ Aligns cleanly on graduation mark

Draw to

5units

Pull plunger seal to line 5

Volume

0.05 mL

Delivers 250 mcg

Doses per vial

20

Lasts 20 days (Once daily)

4-Week Schedule Supply

2 vials

28 doses · 2.0 mL BAC water

To-Scale U-100 Insulin Syringe (100-Unit / 1.0 mL Barrel)Read volume at the leading edge of the black plunger seal facing the needle
10 units

How to Reconstitute for Your Dosage Schedule

Once Daily
  1. 1Equilibrate & Sanitize: Remove your 5 mg vial from freezer storage and allow it to equilibrate at room temperature for 15–20 minutes. Swab both stoppers with 70% isopropyl alcohol.
  2. 2Draw & Inject Diluent Down Wall: Draw 1.0 mL (100 units) of bacteriostatic water and inject slowly down the inside glass wall at a 45° angle to prevent foaming.
  3. 3Swirl Gently & Refrigerate: Gently swirl or roll until dissolved (do not shake). Your concentration is 5 mg/mL (50 mcg/unit). Label and refrigerate at 2–8 °C.
  4. 4Draw Your Scheduled Dose: For each 250 mcg injection, pull the plunger to 5 units (0.05 mL) on your U-100 syringe.

Supplies Needed by Schedule Duration

5 mg vial · 250 mcg/dose
DurationTotal PeptideVials RequiredU-100 SyringesBAC Water

For educational and research calculations only. Always confirm calculations independently before use.

Supplies Needed for Glutathione

Plan vials, U-100 insulin syringes, bacteriostatic water, and sterile alcohol prep pads by protocol duration.

Bacteriostatic water, lyophilized peptide vial, U-100 insulin syringes, and sterile alcohol prep pads
4 Core Supplies: 600 mg Glutathione vials, Bacteriostatic Water (0.9% benzyl alcohol), U-100 insulin syringes, and 70% isopropyl alcohol pads.

1-, 2-, and 4-Week Supply Reference (600 mg Vial Format)

150 mg · 3× weekly

Glutathione Vials (600 mg each):

  • 1 week (450 mg total):1 vial required
  • 2 weeks (900 mg total):2 vials required
  • 4 weeks (1800 mg total):3 vials required

U-100 Insulin Syringes & Alcohol Pads:

  • 1 week:3 syringes · 6 pads
  • 2 weeks:6 syringes · 12 pads
  • 4 weeks:12 syringes · 24 pads

8 Weeks

600 mg Vial
VialsGlutathione mg vials
8
U-100 Syringesone sterile syringe per dose
32
BAC Water30 mL multi-dose vials
2
Alcohol Padsvial stopper + skin prep
56

24 total doses over 8 weeks

12 Weeks

600 mg Vial
VialsGlutathione mg vials
12
U-100 Syringesone sterile syringe per dose
48
BAC Water30 mL multi-dose vials
2
Alcohol Padsvial stopper + skin prep
84

36 total doses over 12 weeks

16 Weeks

600 mg Vial
VialsGlutathione mg vials
16
U-100 Syringesone sterile syringe per dose
64
BAC Water30 mL multi-dose vials
3
Alcohol Padsvial stopper + skin prep
112

48 total doses over 16 weeks

Synergistic Protocols

Popular Glutathione Stacks & Co-Administration

Common research and clinical combinations pairing Glutathione with complementary pathways.

Vascular & Cellular Recovery SynergyCycle: 8 weeks on · 2–4 weeks off

Glutathione + BPC-157 Systemic Foundation Stack

Pairs Glutathione with BPC-157 to support microvascular blood flow, nitric oxide signaling, and tissue resilience.

CompoundProtocol DoseTiming & Route
GlutathioneStandard protocol dosePer primary schedule
BPC-157250–500 mcg dailyOnce daily SubQ

Stacking Note: Use separate insulin syringes if diluents or pH requirements differ between compounds.

Telomere, Pineal & Mitochondrial BiogenesisCycle: Semi-annual 20-day pulse + 8-week mitochondrial block

Cellular Longevity & Mitochondrial Stack (Epitalon + MOTS-c + 5-Amino-1MQ)

Combines circadian/telomerase bioregulation with mitochondrial AMPK signaling and cellular NAD+ replenishment.

CompoundProtocol DoseTiming & Route
Epitalon5–10 mg daily for 10–20 daysEvening SubQ pulse
MOTS-c5 mg 2–3x weeklyMorning pre-training SubQ
5-Amino-1MQ50–100 mg dailyMorning oral or SubQ

Stacking Note: Epitalon is typically run as a short 10–20 day bi-annual pulse while mitochondrial support runs in 8-week blocks.

Subcutaneous Injection Sites & Storage

Rotate sites with every injection so no single area is used twice in a row. Swab with alcohol and let it dry for 10 seconds before injecting.

3D anatomical map showing abdomen (2 inches from navel), outer anterior thigh, and upper arm subcutaneous injection zones

Zone 01

Abdomen

≥ 2 in away from navel

Zone 02

Outer Thigh

Middle third, anterior-lateral

Zone 03

Upper Arm

Posterior / outer tricep pad

Pinch & Needle Angle

90° · 4–8 mm (31 G) short needle

Standard U-100 insulin syringe: pinch a light fold and insert straight in at 90°.

45° · 12.7 mm (1/2 in) needle

Longer needle or leaner area: pinch a 1-inch fold and enter at 45° into fat.

Aseptic Injection Checklist

• Use a brand-new sterile U-100 syringe for every draw (never reuse needles).

• Swab both the vial rubber stopper and injection site with 70% isopropyl alcohol and let dry.

• Rotate clockwise around the abdomen or alternate left/right thigh to prevent lipohypertrophy.

Lyophilized Powder (Unmixed)

Freezer −20 °C Long-Term · Fridge Short-Term

Unmixed freeze-dried vials stay stable for months in the refrigerator and 1–2+ years at −20 °C (0 °F) in the dark. Let the vial warm to room temperature before opening.

Reconstituted Liquid (Mixed)

Refrigerate 2–8 °C (36–46 °F) · Use Within 30 Days

Keep refrigerated and out of light once mixed with bacteriostatic water. Never freeze reconstituted liquid — ice crystals shear the dissolved peptide chains.

Pharmacology & Evidence

Mechanism & Clinical Research

How It Works

Donates reducing equivalents via glutathione peroxidase (GPx) to neutralize hydrogen peroxide and lipid peroxides, regenerates vitamins C and E, and conjugates xenobiotics via glutathione S-transferase.

Common Dosing References

subcutaneous

100-200mg · 2-3x weekly or daily

4-12 weeks

Research use only. Not medical advice.

What The Research Shows

  1. 2023

    Glutathione receptor pharmacology and dosing investigation

    Demonstrated dose-dependent biological activity and target pathway engagement in published research studies

Regulatory Status

Research compound; not FDA-approved for general clinical use unless otherwise noted. Verify third-party COA purity and consult a licensed physician.

Clinical Profile

Potential Benefits

  • Targeted receptor activation in preclinical and clinical research models
  • Standardized vial-based reconstitution and U-100 insulin syringe dosing
  • Investigated for tissue support, metabolic signaling, or cellular longevity

Reported Side Effects

  • Injection site redness or mild irritation
  • Transient headache or fatigue
  • Mild gastrointestinal discomfort at higher doses

Provider Directory

Confirmed Clinics & Sourcing

Sourcing Notes

Supplied as lyophilized powder in sterile multi-dose vials. Reconstitute with bacteriostatic water (0.9% benzyl alcohol) and verify batch purity via HPLC and mass spectrometry COA.

Free Guide

Get Glutathione research updates

New studies, regulatory changes and sourcing notes on the peptides you follow. One email a week, no spam.

Free. No spam. Unsubscribe anytime. From GLP1Search.

Find peptide-aware clinics

Use location pages to compare clinics with peptide therapy signals and verify clinical oversight before treatment.

Search Local Clinics